OBD Codes

P0124

Throttle/Pedal Position Sensor/Switch "A" Circuit Intermittent

Moderatesensor

Overview

The P0124 diagnostic trouble code means the PCM has identified a throttle/pedal position sensor/switch "a" circuit intermittent problem. This code indicates that a sensor or its circuit is not providing expected readings to the engine management system. Faulty sensor data can cause the PCM to make incorrect adjustments, affecting engine performance.

Symptoms

  • Poor fuel economy
  • Engine running rough
  • Intermittent stalling
  • Check Engine Light (MIL) illuminated

Common Causes

  • Faulty PCM (Powertrain Control Module)
  • Incorrect sensor installed
  • Sensor contamination or buildup
  • Faulty sensor (out of range or failed)

Diagnosis Steps

  1. 1Connect an OBD-II scanner and read all stored trouble codes and freeze frame data
  2. 2Locate the specific sensor referenced by the code
  3. 3Inspect the sensor connector for corrosion, damage, or loose pins
  4. 4Test the sensor output using a multimeter or scan tool live data
  5. 5Check the wiring between the sensor and the PCM for opens or shorts

Estimated Repair Cost

$75$350

Cost varies by vehicle, location, and repair shop. Includes parts and labor.

Commonly Affected Vehicles

Nissan SentraHyundai ElantraFord FocusMazda 3

Related Codes

More Sensor Codes

Frequently Asked Questions

Most automotive sensors last 80,000-150,000 miles, though this varies by sensor type and driving conditions. Oxygen sensors and temperature sensors tend to degrade gradually over time.