OBD Codes

P0359

Ignition Coil "I" Primary/Secondary Circuit

Moderateignition

Overview

The P0359 code means the PCM has detected a ignition coil "i" primary/secondary circuit condition. This diagnostic trouble code relates to the ignition system, which is critical for proper combustion in the engine cylinders. When this code is triggered, one or more cylinders may not be firing correctly, leading to rough running, power loss, and potential catalytic converter damage if not addressed.

Symptoms

  • Check Engine Light (MIL) illuminated
  • Flashing Check Engine Light during acceleration
  • Engine misfiring or running rough
  • Noticeable engine vibration

Common Causes

  • Faulty ignition coil(s)
  • Worn or fouled spark plugs
  • Damaged spark plug wires or boots
  • Faulty crankshaft or camshaft position sensor

Diagnosis Steps

  1. 1Connect an OBD-II scanner and read all stored trouble codes and freeze frame data
  2. 2Inspect spark plugs for wear, fouling, or damage; replace if necessary
  3. 3Test ignition coils using a multimeter or ignition coil tester
  4. 4Check spark plug wires and boots for damage or arcing
  5. 5Perform a compression test on the affected cylinder(s)

Estimated Repair Cost

$100$500

Cost varies by vehicle, location, and repair shop. Includes parts and labor.

Commonly Affected Vehicles

Toyota CorollaHonda AccordFord EscapeChevrolet Equinox

Related Codes

More Ignition Codes

Frequently Asked Questions

Driving with a misfire is not recommended. A misfiring engine can damage the catalytic converter, reduce fuel economy, and lead to complete engine failure. If the Check Engine Light is flashing, stop driving immediately.