P0410
Secondary Air Injection System Malfunction
Moderateemission
Overview
The P0410 code indicates the PCM has identified a secondary air injection system malfunction issue. This code is associated with the vehicle's emission control systems designed to reduce harmful exhaust pollutants. A malfunction in these systems can increase vehicle emissions beyond acceptable limits and will likely cause a failed emissions inspection.
Symptoms
- Hissing or sucking sound from engine bay
- Reduced engine performance
- Poor fuel economy
- Failed emissions test
Common Causes
- Clogged air injection passages
- Damaged or disconnected air injection hoses
- Faulty secondary air injection pump
- Failed relay in the air injection system
Diagnosis Steps
- 1Connect an OBD-II scanner and read all stored trouble codes and freeze frame data
- 2Inspect the secondary air injection pump for proper operation
- 3Check all hoses and pipes in the air injection system for damage or leaks
- 4Test the switching valve solenoid and relay with a multimeter
- 5Verify airflow through the system using a flow meter if available
Estimated Repair Cost
$200 — $700
Cost varies by vehicle, location, and repair shop. Includes parts and labor.
Commonly Affected Vehicles
Volkswagen PassatMercedes-Benz C-ClassMazda CX-5Honda CR-V
Related Codes
More Emission Codes
P0411Secondary Air Injection System Incorrect Flow Detected
ModerateP0412Secondary Air Injection System Switching Valve "A" Circuit
ModerateP0413Secondary Air Injection System Switching Valve "A" Circuit Open
ModerateP0414Secondary Air Injection System Switching Valve "A" Circuit Shorted
ModerateP0415Secondary Air Injection System Switching Valve "B" Circuit
ModerateP0416Secondary Air Injection System Switching Valve "B" Circuit Open
ModerateFrequently Asked Questions
Yes, any illuminated Check Engine Light will result in a failed emissions inspection. The emission system issue must be repaired and the code cleared before the vehicle can pass.