P0804

The P0804 code indicates an 1-4 upshift (skip shift) lamp control circuit fault has been detected in the vehicle's electrical system. This code relates to the internal control module, charging system, or starter circuit. Electrical issues at the PCM level can cause widespread vehicle operation problems and should be diagnosed thoroughly. This guide covers everything you need to know about this topic, including common causes, step-by-step solutions, and answers to frequently asked questions.

Here are the key things to understand: Vehicle not starting or cranking slowly. Battery draining overnight. Erratic gauge readings. Vehicle going into limp mode or reduced power. Understanding these fundamentals will help you diagnose and resolve this issue more effectively.

The most common reasons this occurs include: Internal module software error. Failed relay or fuse. Water damage to electrical connectors. Short or open circuit in wiring. Identifying the root cause is the first step toward finding the right solution.

To resolve this, follow these recommended steps: Connect an OBD-II scanner and read all stored trouble codes and freeze frame data. Check battery voltage and charging system output with a multimeter. Inspect wiring and connectors related to the trouble code. Test circuit voltage, ground, and resistance with a multimeter. Check related fuses and relays. If these steps do not resolve the issue, consider consulting additional resources or a qualified professional.

This article is part of our Powertrain (P) collection on OBD Codes. We provide comprehensive, up-to-date information to help you find solutions quickly.