OBD Codes

P0976

Shift Solenoid "B" Control Circuit Low

Moderatetransmission

Overview

The P0976 diagnostic trouble code signals a shift solenoid "b" control circuit low condition detected by the transmission control module. This code relates to the automatic transmission system and may affect shift quality, timing, or overall transmission performance. Prompt attention is important to prevent further transmission damage.

Symptoms

  • Unusual whining or grinding noise from transmission
  • Check Engine Light (MIL) illuminated
  • Vehicle stuck in one gear (limp mode)
  • Harsh or delayed shifting

Common Causes

  • Worn or damaged internal transmission components
  • Worn transmission bands or clutch plates
  • Faulty shift solenoid or solenoid pack
  • Wiring issues in the transmission harness

Diagnosis Steps

  1. 1Connect an OBD-II scanner and read all stored trouble codes and freeze frame data
  2. 2Check transmission fluid level and condition; top off or replace if needed
  3. 3Test the transmission speed sensors with a multimeter or scan tool
  4. 4Inspect wiring and connectors for the transmission harness
  5. 5Perform a transmission pressure test if accessible

Estimated Repair Cost

$300$2,500

Cost varies by vehicle, location, and repair shop. Includes parts and labor.

Commonly Affected Vehicles

Ford F-150Jeep Grand CherokeeChevrolet SilveradoRam 1500

Related Codes

More Transmission Codes

Frequently Asked Questions

Driving with a transmission code is risky. Continued driving can cause further damage to the transmission, resulting in significantly higher repair costs. Have it inspected as soon as possible.