OBD Codes

P1113

IAT Sensor Intermittent Low (GM)

Lowsensor

Overview

The P1113 diagnostic trouble code means the PCM has identified a iat sensor intermittent low (gm) problem. This code indicates that a sensor or its circuit is not providing expected readings to the engine management system. Faulty sensor data can cause the PCM to make incorrect adjustments, affecting engine performance.

Symptoms

  • Speedometer reading incorrectly
  • Cruise control not functioning
  • Poor engine performance
  • Erratic gauge readings on dashboard

Common Causes

  • Faulty PCM/ECM not reading sensor correctly
  • Water intrusion in sensor connector
  • Open or shorted sensor wiring
  • Corroded or damaged sensor connector

Diagnosis Steps

  1. 1Connect an OBD-II scanner and read all stored trouble codes and freeze frame data
  2. 2Locate the specific sensor referenced by the code
  3. 3Inspect the sensor connector for corrosion, damage, or loose pins
  4. 4Test the sensor output using a multimeter or scan tool live data
  5. 5Check the wiring between the sensor and the PCM for opens or shorts

Estimated Repair Cost

$75$350

Cost varies by vehicle, location, and repair shop. Includes parts and labor.

Commonly Affected Vehicles

Toyota CorollaHonda CivicChevrolet CruzeFord Focus

Related Codes

More Sensor Codes

Frequently Asked Questions

Most automotive sensors last 80,000-150,000 miles, though this varies by sensor type and driving conditions. Oxygen sensors and temperature sensors tend to degrade gradually over time.