OBD Codes

P2027

EVAP Fuel Vapor Temperature Sensor Circuit High

Lowevaporative

Overview

The P2027 code indicates the PCM has detected a evap fuel vapor temperature sensor circuit high condition in the evaporative emission control (EVAP) system. The EVAP system prevents fuel vapors from escaping into the atmosphere by routing them to the engine for combustion. A fault in this system can result in harmful fuel vapor emissions and a failed emissions test.

Symptoms

  • Failed emissions test
  • Hissing sound from fuel tank area
  • Difficulty filling fuel tank
  • Slight decrease in fuel economy

Common Causes

  • Saturated or damaged charcoal canister
  • EVAP canister vent blocked
  • Faulty purge valve or vent valve
  • Fuel tank leak or damaged seal

Diagnosis Steps

  1. 1Connect an OBD-II scanner and read all stored trouble codes and freeze frame data
  2. 2Inspect and tighten the gas cap; replace if damaged or worn
  3. 3Perform a smoke test on the EVAP system to locate leaks
  4. 4Inspect all EVAP hoses and connections for cracks or disconnections
  5. 5Test the purge valve and vent valve with a multimeter and vacuum pump

Estimated Repair Cost

$50$600

Cost varies by vehicle, location, and repair shop. Includes parts and labor.

Commonly Affected Vehicles

Chevrolet SilveradoToyota CorollaToyota CamryHonda Civic

Related Codes

More Evaporative Codes

Frequently Asked Questions

Yes, a loose, damaged, or missing gas cap is one of the most common causes of EVAP system codes. Always try tightening the gas cap first and driving for a few days to see if the code clears.