OBD Codes

P2102

Throttle Actuator Control Motor Circuit Low

Severeengine

Overview

The P2102 code indicates the engine control module has detected a throttle actuator control motor circuit low condition. This is an engine-related diagnostic trouble code that may indicate a mechanical or control issue affecting the engine's operation. Depending on the severity, this code may require immediate attention to prevent engine damage.

Symptoms

  • Check Engine Light (MIL) illuminated
  • Engine running rough or stalling
  • Engine overheating
  • Vehicle goes into reduced power mode

Common Causes

  • Worn or damaged engine components
  • Timing chain/belt wear or failure
  • Carbon buildup in engine
  • Faulty sensors providing incorrect data

Diagnosis Steps

  1. 1Connect an OBD-II scanner and read all stored trouble codes and freeze frame data
  2. 2Check engine oil level and condition; change if overdue
  3. 3Perform a compression and leak-down test
  4. 4Inspect related sensors and their wiring connections
  5. 5Listen for unusual engine noises indicating mechanical issues

Estimated Repair Cost

$200$3,000

Cost varies by vehicle, location, and repair shop. Includes parts and labor.

Commonly Affected Vehicles

Nissan MaximaToyota CorollaKia SorentoJeep Wrangler

Related Codes

More Engine Codes

Frequently Asked Questions

Engine codes can range from minor sensor issues to critical mechanical failures. If you notice overheating, knocking, or significant power loss, stop driving and have the vehicle towed to a mechanic.